WHAT WE OFFER
Maskindynamikk carries out noise and vibration measurements according to DNV Comfort Class.
Maskindynamikk is a 3rd party representative and is objective in such matters.
One of our services is design and introduction of systems and routines for reliability based maintenance of rotating machinery. Vibration analysis makes it possible detecting errors and damages at an early stage.
We use PC-based solutions for online measurements. This makes us very flexible. It allows us to develop software especially designed for each case if necessary.
Our professional expertise combined with modern and accurate instrumentation makes us a natural choice when it comes to measuring and documenting shaft power- and torsional vibrations.
We have several channels of telemetry and multi-channel DAQ-devices which makes us capable doing simultaneous strain gauge measurments from various shafts.
Measuring with multiple sensors is a big advantage when troubleshooting e.g. gearboxes. This kind of machinery contains several bearings, gearwheels and rotating shafts. Simultanious measurements of these components gives us a major advantage analysing the measured data.
Full-scale speed and power testing of ships determining the accuracy of the scale model of the design.
Maskindynamikk is currently employing vibration analysts certified according to ISO 18436-2 category III.
Using state-of-the-art equipment and years of experience Maskindynamikk can provide our customers with professional troubleshooting services within vibration and noise measurements.
Certificate of Approval in noise and vibration measurements related to the COMF Additional Class Notation
No. RTD0/RGI/20211019131514
Certificate of Approval No. 020/X4/01/368
for the following services to ship and other units classes by RINA:
L - Sound pressure level meas. of public address and general alarm systems on board ships
O - Measurements of noise level onboard ships
Z - Condition Based Maintenance of machinery systems
Z - Determination of engine power
Z - Firms proving Non-Destructive Testing
Z - Vibration analysis of machinery and equipment
Z - Vibration analysis survey of rotating equipment
Certificate No. AOSS0000JDC:
Noise and Vibration measurements according to DNV-GL's comfort class - COMF(V-crn), in accordance with Class Programme DNVGL-CP-0484
Certificate No. AOSS0000JDB:
Measurements of noise level on board ships, in accordance with Class Programme DNVGL-CP-0484
Cetificate No. AOSS0000JD9:
Sound pressure level measurements of public address and gereral alarm systems on board ships, in accordance with Class Programme DNVGL-CP-0484
Certificate No. AOSS0000JDA:
Indoor climate measurements according to DNV-GL's comfort calss - COMF(C-crn), in accordance with Class Programme DNVGL-CP-0484
CM+
Online Condition Monitoring system
CM+ is 24/7 online system for continuously condition monitoring, data recording and risk analysis. CM+ supports a wide range of rotating equipment and structures where vibration is the primary monitoring parameter.
TorqueMonitor
Wireless Shaft Power & Torsional vibration measurement system
"TorqueMonitor" is a professional tool for shaft power and torsional vibration measurements and analysis with our high resolution wireless hardware.
Omega
Professional solution for periodic maintenance
"Omega" is a professional tool for shaft power, strain gauge, vibration and torsional vibration measurements and analysis.
OmegaPro
Permanent Shaft Power & Vibration
measurement system
"OmegaPro" is a permanent system developed for measuring the power of the shaft, strain gauge and torsional vibrations, and the translation of the received values into the control system.
CSI 2140
Machinery Health Analyzer
Maskindynamikk is a distributor of Emerson Process Management products, with an special emphasis on offline condition monitoring products.
Get in Touch
Lerstadvegen 545, 3 et.
Aalesund, 6022 Norway
Phone: (+47) 70 14 45 00
Email: office@maskindynamikk.no